F065 को हालको मूल्य
बाहिरी पाइपको नाममात्र व्यास:
- HL क्रायोजेनिक उपकरणको इन्टरप्राइज मानक द्वारा सिफारिस गरिएको। यो ग्राहकको आवश्यकता अनुसार पनि उत्पादन गर्न सकिन्छ।
- डिजाइन दबाब:
- सिफारिस गरिएको ≤ १६ बार। वा वेल्डेड जडान प्रकार (≤४० बार) चयन गर्दछ।
- बाहिरी पाइपको सामग्री
विशेष आवश्यकता बिना, भित्री पाइप र बाहिरी पाइपको सामग्री एउटै चयन गरिनेछ।
३.१.३ वेल्डेड जडान प्रकार
ओडेल
जडान
प्रकारहरू
भित्री पाइपको नाममात्र व्यास
डिजाइन दबाब
सामाग्री
भित्री पाइपको
मानक
टिप्पणी
W010 को लागि सोधपुछ गर्नुहोस्
००X
स्थिर भ्याकुम इन्सुलेटेड लचिलो नलीको लागि वेल्डेड जडान प्रकार
DN10, ३/८"
८ ~ ४० बार
३०० शृङ्खला स्टेनलेस स्टील
ASME B31.3 वैकल्पिक
| V | DN20, ३/४" | DN२५, १" | बाहिरी पाइपको नाममात्र व्यास: | |
| डिजाइन दबाब | भित्री पाइपको सामग्री। | A ३०४ हो, | DN40, १-१/२" | C भनेको ३१६ हो, |
| D ३१६L हो, | एचएलएचएस | एचएलएचएस | W015 को लागि सोधपुछ गर्नुहोस् | ००X |
| DN१५, १/२" | No | No | एचएलएचएस | डिजाइन दबाब |
| Nominal Diameter of Inner Pipe | ००X | एचएलएचएस | W025 को परिचय | ००X |
| Design Pressure | एचएलएचएस | DN32, १-१/४" | ००X | DN32, १-१/४" |
| एचएलएचएस | एचएलएचएस | एचएलएचएस | DN40, १-१/२" | एचएलएचएस |
| सिफारिस गरिएको ≤ DN25 वा 1"। वा फ्ल्यान्ज र बोल्टहरू सहितको भ्याकुम बेयोनेट जडान प्रकार (DN10, 3/8" देखि DN80, 3" सम्म), वेल्डेड जडान प्रकार (DN10, 3/8" देखि DN150, 6" सम्म) चयन गर्दछ। | ००X | |||
| DN५०, २" | एचएलएचएस | |||
| Material | 300 Series Stainless Steel | |||
| मानक | LN2एचएलएचएस2W080 को लागि सोधपुछ | |||
००X
DN८०, ३"
| LHSW100 को परिचय | |
| ००X | |
| DN१००, ४" |  |
LHSW125 को परिचय
| ००X | DN१२५, ५" | LHSW150 को परिचय | ००X | DN१५०, ६" | बाहिरी पाइपको नाममात्र व्यास: |
| HL क्रायोजेनिक उपकरणको इन्टरप्राइज मानक द्वारा सिफारिस गरिएको। यो ग्राहकको आवश्यकता अनुसार पनि उत्पादन गर्न सकिन्छ। | बाहिरी पाइपको सामग्री | DN२५, १" | DN२५, १" | DN२५, १" | DN२५, १" |
| प्रकारहरू | DN२५, १" | DN२५, १" | DN२५, १" | DN२५, १" | |
| मानक | DN२५, १" | DN२५, १" | DN२५, १" | DN२५, १" | |
| DN10, ३/८" | DN२५, १" | DN२५, १" | DN२५, १" | DN२५, १" | |
| डिजाइनको दबाब। | / | DN२५, १" | DN२५, १" | / | |
| भित्री पाइपको सामग्री। | / | DN२५, १" | DN२५, १" | / | |
| C भनेको ३१६ हो, | / | DN२५, १" | DN२५, १" | / | |
| एचएलएचएस | / | DN२५, १" | DN२५, १" | / | |
| DN१५, १/२" | / | DN२५, १" | DN२५, १" | / | |
| ००X | / | / | DN२५, १" | / | |
| एचएलएचएस | / | / | DN२५, १" | / | |
| ००X | / | / | DN२५, १" | / |
भित्री पाइपको नाममात्र व्यास:
| सिफारिस गरिएको ≤ DN25 वा 1"। वा फ्ल्यान्ज र बोल्टहरू सहितको भ्याकुम बेयोनेट जडान प्रकार (DN10, 3/8" देखि DN80, 3" सम्म), वेल्डेड जडान प्रकार (DN10, 3/8" देखि DN150, 6" सम्म) चयन गर्दछ। | बाहिरी पाइपको नाममात्र व्यास: |
| HL क्रायोजेनिक उपकरणको इन्टरप्राइज मानक द्वारा सिफारिस गरिएको। यो ग्राहकको आवश्यकता अनुसार पनि उत्पादन गर्न सकिन्छ। | डिजाइन दबाब: |
| सिफारिस गरिएको ≤ १६ बार। वा वेल्डेड जडान प्रकार (≤४० बार) चयन गर्दछ। | बाहिरी पाइपको सामग्रीविशेष आवश्यकता बिना, भित्री पाइप र बाहिरी पाइपको सामग्री एउटै चयन गरिनेछ।३.२ गतिशील भ्याकुम इन्सुलेटेड पाइपिङ प्रणाली3/S |
| ३.२.१ क्ल्याम्प सहितको भ्याकुम संगीन जडान प्रकार | ओडेल |
| जडान | प्रकारहरू |
| भित्री पाइपको नाममात्र व्यास | डिजाइन दबाब |
| सामाग्री | भित्री पाइपको |
| मानक | टिप्पणी |
HDB01008 को परिचय
गतिशील भ्याकुम इन्सुलेटेड लचिलो नलीको लागि क्ल्याम्पहरू सहितको भ्याकुम संगीन जडान प्रकार
lDN10, ३/८"
l८ बार
| ३०० शृङ्खला स्टेनलेस स्टील C भनेको ३१६ हो, | भित्री पाइपको सामग्री। | |
| A ३०४ हो, | B भनेको ३०४L हो,C भनेको ३१६ हो,D ३१६L हो, | |
| E अर्को हो। | एचएलएच | DB01508 को परिचय |
| DN१५, १/२" | डिजाइन दबाब: | डिजाइन दबाब: |
| DN20, ३/४" | डिजाइन दबाब: | डिजाइन दबाब: |
| DN२५, १" | डिजाइन दबाब: | डिजाइन दबाब: |
| बाहिरी पाइपको नाममात्र व्यास: | डिजाइन दबाब: | डिजाइन दबाब: |
सिफारिस गरिएको ≤ ८ बार। वा फ्ल्यान्ज र बोल्टहरू सहितको भ्याकुम बेयोनेट जडान प्रकार (≤१६ बार), वेल्डेड जडान प्रकार (≤४० बार) चयन गर्दछ।बाहिरी पाइपको सामग्रीविशेष आवश्यकता बिना, भित्री पाइप र बाहिरी पाइपको सामग्री एउटै चयन गरिनेछ।
पावर अवस्था:
HL-HX-X-साइटले भ्याकुम पम्पहरूमा बिजुली आपूर्ति गर्नु पर्छ र HL क्रायोजेनिक उपकरणलाई स्थानीय बिजुली जानकारी (भोल्टेज र हर्ट्ज) जानकारी गराउनु पर्छ।-00-X
३.२.२ फ्ल्यान्ज र बोल्ट सहितको भ्याकुम संगीन जडान प्रकार
ओडेल
जडान
प्रकारहरू
भित्री पाइपको नाममात्र व्यास
डिजाइन दबाब
सामाग्री
भित्री पाइपको
मानक
टिप्पणी
Nominal Diameter of Inner Pipe
००X
८ ~ १६ बार
DN10, ३/८"
८ ~ १६ बार
३०० शृङ्खला स्टेनलेस स्टील
Design Pressure
डिजाइनको दबाब।
०८ भनेको ८ बार हो,
१६ भनेको १६ बार हो।
भित्री पाइपको सामग्री।
A ३०४ हो,
B भनेको ३०४L हो,
C भनेको ३१६ हो,
D ३१६L हो,
E अर्को हो।
F015 को बारेमा
००X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040 को बारेमाX | भ्याकुम इन्सुलेटेड फेज सेपरेटर शृङ्खला | DN10, 3/8" | अर्मेनियाली
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| फ्रान्सेलीबाहिरी पाइपको नाममात्र व्यास:X | DN15, 1/2" | |||||
| फ्रान्सेलीसिफारिस गरिएको ≤ १६ बार। वा वेल्डेड जडान प्रकार (≤४० बार) चयन गर्दछ।X | DN20, 3/4" | |||||
| फ्रान्सेलीपावर अवस्था:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: आइसल्याण्डिक
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| फ्रान्सेली०८ भनेको ८ बार हो,00X | र २५, ३२, ४०। | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| फ्रान्सेलीसामोअन00X | DN15, 1/2" | |||||
| फ्रान्सेलीसिन्धी00X | DN20, 3/4" | |||||
| फ्रान्सेलीताजिक00X | DN25, 1" | |||||
| फ्रान्सेलीथाई00X | DN32, 1-1/4" | |||||
| फ्रान्सेलीउज्बेक00X | DN40, 1-1/2" | |||||
| फ्रान्सेलीझोसा00X | DN50, 2" | |||||
| फ्रान्सेलीजुलु00X | DN65, 2-1/2" | |||||
| फ्रान्सेलीउडिया00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: पावर अवस्था:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS००X00X | DN10, ३/८" | DN10, 3/8" | ३०० शृङ्खला स्टेनलेस स्टील | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| फ्रान्सेलीDN१५, १/२"00X | DN15, 1/2" | |||||
| फ्रान्सेलीDN20, ३/४"00X | DN20, 3/4" | |||||
| फ्रान्सेलीDN२५, १"00X | DN25, 1" | |||||
| फ्रान्सेलीW03200X | DN32, 1-1/4" | |||||
| फ्रान्सेलीW04000X | DN40, 1-1/2" | |||||
| फ्रान्सेलीW05000X | DN50, 2" | |||||
| फ्रान्सेलीW06500X | DN65, 2-1/2" | |||||
| फ्रान्सेलीW08000X | DN80, 3" | |||||
| Hभ्याकुम ज्याकेट नली00X | DN100, 4" | |||||
| Hचीन तरल अक्सिजन प्रवाह नियमन भल्भ00X | DN125, 5" | |||||
| Hथोक मूल्य चीन चीन ISO मानक ट्याङ्क २...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSगतिशील भ्याकुम पम्प प्रणाली00X | भ्याकुम इन्सुलेटेड फेज सेपरेटर शृङ्खला | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| फ्रान्सेलीव्हाट्सएप00X | DN15, 1/2" | |||||
| फ्रान्सेलीWeChat ले00X | DN20, 3/4" | |||||
| फ्रान्सेलीजर्मन00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ग्रीक
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
डेनिस
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLलाओX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | अर्मेनियाली
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHइस्टोनियालीX | DN15, 1/2" | |||||
| HLHफ्रिसियनX | DN20, 3/4" | |||||
| HLHगुजरातीX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: आइसल्याण्डिक
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLमलयालम00X | माओरी | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDसामोअन00X | DN15, 1/2" | |||||
| HLHDसिन्धी00X | DN20, 3/4" | |||||
| HLHDताजिक00X | DN25, 1" | |||||
| HLHDथाई00X | DN32, 1-1/4" | |||||
| HLHDउज्बेक00X | DN40, 1-1/2" | |||||
| HLHDझोसा00X | DN50, 2" | |||||
| HLHDजुलु00X | DN65, 2-1/2" | |||||
| HLHDउडिया00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
